Dometic BUTTNER MT150PP Instructions De Montage Et De Service page 11

MT150PP, MT230PP, MT350PP, MT550PP
I
NOTE
Supplementary information for operating the product.
2 Safety instructions
Also observe the safety instructions and stipulations issued by the vehicle manufac-
turer and authorized workshops.
2.1 General safety
!
WARNING! Failure to obey these warnings could result in death or serious
injury.
Electrocution hazard
• Installation and removal of the solar charge controller may only be carried out by
qualified personnel.
• Do not operate the device if it is visibly damaged.
• If this device's power cable is damaged, the power cable must be replaced by the
manufacturer, a service agent or a similarly qualified person in order to prevent safety
hazards.
• This device may only be repaired by qualified personnel. Improper repairs can lead
to considerable hazards.
• If you disassemble the device:
– Detach all connections.
– Ensure that no voltage is present on any of the inputs and outputs.
• Do not use the device in wet conditions or submerge in any liquid. Store in a dry
place.
• Only use accessories that are recommended by the manufacturer.
• Do not modify or adapt any of the components in any way.
• Disconnect the device from the power supply:
– Before each cleaning and maintenance
– After every use
– Before changing a fuse
– Before carrying out electrical welding work or work on the electrical system
Health hazard
• This device can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowl-
edge if they have been given supervision or instruction concerning use of the device
in a safe way and understand the hazards involved.
• Electrical devices are not toys.
Always keep and use the device out of the reach of very young children.
• Children must be supervised to ensure that they do not play with the device.
• Cleaning and user maintenance shall not be made by children without supervision.
EN
Safety instructions
11