Publicité
Les langues disponibles
Les langues disponibles
10
Language
The display language can be set here.
Water hardness
The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness c orrectly, so that the appli
ance indicates accurately when the descal
ing programme should be run. The factory
setting for the water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip briely in water, gently
shake off any drips, and check the result
after one minute.
Water hardness
Level
German (°dH)
1
1-7
8-14
15-21
22-30
Drink counter
This displays how many drinks have been
dispensed since the appliance was irst put
into operation.
Robert Bosch Hausgeräte GmbH
All manuals and user guides at all-guides.com
The rotary selector (3) adjusts the grind
s ettings from coarse to ine.
¡ W a r n i n g !
Adjust the grinding unit only while it is
r unning! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● While the grinding unit is running, adjust
French (°fH)
1-13
14-25
26-38
39-54
Note:
apparent until after the second cup of
coffee.
Note:
grinding unit to coarser setting!
appears in the display, the grind setting
for the coffee beans is too ine. Adjust the
grinding unit to a coarser setting.
Tip:
iner grind, for lighter beans a coarser grind.
the rotary selector (3) from ine (
anticlockwise) to coarse (
wise) as required.
a
b
The new setting will not become
If the message
Please adjust
For dark roast coffee beans, choose a
en
Publicité
