oventrop 6102010 Notice D'installation page 3

The Oventrop Quality Management
System is certified to DIN EN ISO 9001
EN
Application:
Potable water softening installations PN 10 for industry,
trade and domestic use. Max. water temperature 90°C.
ACS certified.
Description:
Bypass mixing valves are automatic mixing valves for
potable water softening installations. The model described
here, was especially designed for installations with higher
water consumption. The bypass mixing valve is installed
in the bypass pipe.
Once it has been set, the bypass mixing valve automatically
maintains the hardness of the mixed water irrespective
of consumption and pressure variations. The hardness of
the water is only set once, during installation. If the
hardness of the untreated water changes significantly,
e.g. if the water authority supplies a different type of
water, it is of course necessary to readjust not only the
water softener but also the bypass mixing valve.
The body of the bypass mixing valve is made of corro-
sion-resistant bronze. All other components are made of
brass, plastic and stainless steel. The seals are made of
KTW-tested EPDM.
Item no.:
6102010 Bypass mixing valve PN 10, DN 32, G 1
Pressure loss depending on the flow rate:
Dimensions:
* SW = spanner size
1
⁄ .
4
Valves, controls + systems
Bypass mixing valve DN 32
Installation instruction
*
*
*
130
Flow rate V [l/s]
*
*
·