Publicité
Les langues disponibles
Les langues disponibles
C
Useful information
Problem
Laundry comes out
damp at the end of
the drying process.
The dryer cannot
be opened or the
programme cannot
be started. The
dryer does not get
activated when
adjusted.
The programme has
been interrupted for
no
reason.
Reason
WARNING:
The laundry that comes out hot at the
end of the drying process generally feels
more humid.
The programme used might
not be suitable for the type of
laundry.
The surface of the lint filter
might be clogged.
The heat exchanger might be
clogged.
The dryer might be overloaded
with laundry.
The laundry might be
insufficiently spun.
The dryer might not be plugged
in.
The loading door might be open.
You might not have set a
programme or pressed the
Start/Pause key.
Child lock might be active.
The loading door might not be
closed properly.
There might have been a power
failure.
The water tank might be full.
31
Check the care labels on the
laundry items, select a suitable
programme for the type of
laundry and additionally, use the
time programmes.
Wash the filter with lukewarm
water.
Clean the heat exchanger.
Do not overload the dryer.
Select a higher spin speed on
your washing machine.
Make sure that the plug is fitted
in the socket.
Make sure that the loading door
is properly closed.
Make sure that the programme
has been set and the dryer
is not in the Standby (Pause)
mode.
Deactivate the child lock.
Make sure that the loading door
is properly closed.
Press the Start/Pause key to
start the programme.
Empty the water tank.
EN
Solution
Publicité
