Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
Selection Stand By
• After 15 minutes without user action in selection mode, machine goes to energysaving
mode due to decrease energy consumption.
• "End"led must blink for 0,5 sec ON, 3 sec OFF.
• If user turns knob (except zero position) and presses buttons, it does not make any action.
• After that, to restart the machine it will be necessary to move selector to OFF and select
again the program.
Programme Progress
The programme follow-up indicator shows the progress of the programme running. At the
beginning of each programme step, the relevant indicator LED comes on and the LED of the
completed step goes off.
Drying:
• It remains on during the whole drying process until the drying level reaches "Cooling".
Cooling:
• It lights up when the drying level reaches "Cooling" and remains on until the next step.
End:
• It lights up at the end of the programme.
During the Programme
• If you open the door when the programme is running, the product will switch to standby
mode. Once the door has been closed, press the Start/Pause key to resume the programme.
• Do not open the loading door when the programme is running. If you have to open the door,
do not keep it open for a long time.
Programme End
Once the programme is over, the warning LEDs for Start/Pause, water tank level, filter
cleaning and heat exchanger cleaning will turn on. Additionally, an audible warning will be
given at the end of the programme. You can remove the laundry to make the machine ready
for a new load.
19
EN
Publicité
