HIGHONE DHP 7 A++ W701TV2 Consignes D'utilisation page 33

C
If the drying process is completed, open the loading door and
wait for it to cool down.
Open the kick plate cover as shown.
1
Unlock the exchanger cover by turning in the direction
2
shown with arrows.
Take out the exchanger cover as shown.
3
Clean the front surface of the exchanger as shown.
4
Fit the exchanger cover as shown.
5
Lock the exchanger cover by turning in the direction shown
6
with arrows.
Close the kick plate cover as shown.
7
WARNING:
Do not clean with bare hands since the exchanger fins are
sharp. They may hurt your hands.
Useful information
26 EN