Publicité
Les langues disponibles
Les langues disponibles
B
Installation
Connection to Water Outlet (with optional drain hose)
In products with a heat pump unit, water accumulates in the water tank during the drying
process. You must empty the accumulated water after each drying process. Instead of
periodically emptying the water tank, you can also use the water drain hose provided with
the product to directly drain the water outside.
Connecting the Water Discharge Hose
Pull and take out the end of the hose at the back of the dryer. Do not use any tools to take
1
out the hose.
2
Fit one end of the water discharge hose, which is provided with the product, to the slot
from which you have removed the hose.
Fix the other end of the water discharge hose directly to the water outlet or sink.
3
ATTENTION:
The hose must be connected in a manner that it cannot be
displaced. If the hose comes out during water discharge,
there might be flooding in your house.
Using the appliance
2
2
1
1
3
3
5
EN
Publicité
