Publicité
Les langues disponibles
Les langues disponibles
IGNITION CONTROL ASSEMBLY
WARNING: High Voltage!
1. Unplug heater.
2. Remove side cover screws (4) using 5/16"
nut-driver to expose ignition control assembly
(see Figure 15 or 16, page 11).
3. Remove fuse cover (see Figure 29).
4. Remove fuse from fuse clips (see Figure 29).
5. Replace fuse with fuse of the same type and
rating (GMA-10). Do not substitute a fuse
with a higher current rating.
111168-01A
www.desatech.com
Fuse
Clips
Figure 29 - Replacing Fuse
Fuse
Cover
Fuse
15
Publicité
