Publicité
Les langues disponibles
Les langues disponibles
8
English
Note: You can only turn on the sanitizer if the door is properly closed.
Note: The sanitizer stops if you open the door during the sanitizing cycle.
Note: The sanitizer cycle runs for 10 minutes and then automatically shuts
off.
Charging your Sonicare power toothbrush
Note: Your charger is only compatible with Philips Sonicare toothbrushes that
have a charging hole at the bottom (Fig. 7).
1 Place the handle on the charger.
2 See toothbrush manual for charging indication and status.
Note: See Sonicare power toothbrush charging instructions and charging
times in your toothbrush manual.
Cleaning the Sanitizer
Warning: Do not immerse the sanitizer in water or rinse it under the
faucet.
Warning: Do not clean the sanitizer when the UV light bulb is hot.
For optimal effectiveness, it is recommended to clean your sanitizer weekly.
1 Unplug the sanitizer.
2 Pull the drip tray straight out (Fig. 8). Rinse the drip tray and wipe it clean
with a damp cloth.
3 Clean all interior surfaces with a damp cloth.
4 Remove the protective screen in front of the UV light bulb.
To remove the screen, grasp the edges next to the snaps, gently squeeze
and pull out the protective screen (Fig. 9).
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the metal clasp.
6 Clean the protective screen and the UV light bulb with a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light bulb with the metal
clasp and push the bulb into the clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen with the slots on the
reflective surface near the UV light bulb. Push the screen straight into the
slots on the sanitizer.
9 Place the drip tray back in the UV sanitizer.
Publicité
