Operating Instructions - brennenstuhl BR 1211 Mode D'emploi

Operating Instructions

Technical Data
Device:
Testing certificates:
Protection class:
Power:
Max. current:
Ambient temperature:
Relative humidity:
Sound level of signal:
Battery life:
Selecting the mounting location
NOTICE: It is recommended that you install multi-
ple smoke detectors in your residence or building.
In order to provide minimal protection, it is
recommended that multi-floor buildings have one
smoke detector installed per floor.
WARNING: The smoke detector should be
mounted on the pathways to the bedrooms (stair-
ways, hallways, entry ways, etc.). Please make sure
that it can be heard well from the bedrooms. If an
unfavourable location is chosen, the smoke
detector can be largely ineffective in the case of a
fire. This can reduce the time needed to get to
safety in the event of a fire, endangering your life.
16
BR 1211
VdS tested, EN 14604
IP 20
9 V DC alkaline battery
or MN1604
< 50 mA (Alarm)
0°C – 40°C
10%- 90%
85 dB (3 m distance)
1 year
BR 1211