Description Of The Artromot®-Sp3 - DJO Ormed Artromot-SP3 Mode D'emploi

2. Description of the ARTROMOT®-SP3
The motorized CPM device provides passive
motion to the ankle joint as follows:
plantar flexion / dorsal extension
50° / 0° / 40°
inversion / eversion
40° / 0° / 20°
It can be reconfigured for use on either side
and allows patients to exercise in bed and
while sitting on a chair.
Note!
To unambiguously represent the current
position of the CPM device, the values
for plantar flexion and inversion are
marked with the symbol "–" both on the
display and in this document.
These are some of the outstanding features
of the ARTROMOT®-SP3:
– anatomically correct adjustment
– physiological movements
– control pendant for precise adjustment of
patient-specific therapy values
– symbols for easy operation of the control
pendant
– chip card for storage of the programmed
therapy parameters
Biocompatibility
Those parts of the ARTROMOT®-SP3 that
come into contact with the patient when
the device is used as intended, are designed
to fulfill the biocompatibility requirements
of the applicable standards.
Essential Performance Features
– The programmed angles are accurately
maintained with a tolerance of +/- 2°.
– The programmed speeds are accurately
maintained with a tolerance of +/- 5%.
– The selected mode and mechanical set-
tings do not change during operation.
Frequent functions:
a) Unpacking (device and accessories)
b) Assemble and block footplate on
footplate bracket
c) Assemble and block motor B and
footplate on moving bracket
d) Device connections (mains power
connection, connecting the control
pendant and the motion element)
e) Mechanical adjustments of the motion
element on the rotational axes
f) Programming the control pendant
(range of motion, speed, functions)
g) Storage
40