Henco UFH-THERM-WD Guide Utilisateur page 8

REDUCED operating mode:
Force reduced temperature operation indefinitely.
By pressing (-
temperature starts to blink and can be adjusted.
The measured temperature (OK) reappears after a
few seconds.
External PILOT WIRE mode:
The thermostat will follow the working mode
received on the PILOT WIRE line (A/B).
Blinks to indicate the Comfort mode
(The Comfort setting temperature will be followed)
Blinks to indicate the Reduced mode
(The Reduced setting temperature will be followed)
◄) ►+)
or ( keys the comfort
8