Henco UFH-THERM-WD Guide Utilisateur page 14

15: minutes
On: Minimal starting time in minutes
02: Adjustable From "0" to T cy/2
Of: Minimal resting time between 2 heating
cycles in minutes
02: Adjustable From "0" to T cy/2
Bp: Proportional Integral regulation band
amplitude value in degrees °C or °F:
2.0 °C / 3.6°F
Cp: Value of the compensation in °C:
0.0°C
* This value must be adjusted by a specialist.
Clr: All parameters are reloaded with default
setting values.
End: Press (OK) key to exit installation parameter
Adjustable 1°C to 8°C
14