Henco UFH-THERM-WD Guide Utilisateur page 7

MODE DESCRIPTION
Use the (OK) key to change the mode in the
Operating mode menu. (The active mode is framed)
OFF mode:
Use this mode if your Heating installation needs to
be turned OFF. The display is blank. (Careful in this
mode your installation can freeze.) Parameters are
saved.
COMFORT operating mode:
Force comfort temperature operation indefinitely. By
◄)
pressing (-
temperature starts to blink and can be adjusted.
The measured (OK) temperature reappears after a
few seconds.
►+)
or ( keys, the comfort
7