SPORTSTECH SKY F2 Manuel page 47

8 9
10
13
6
4
2
Step 6:
• Remove Bolts (8), Spring Washers (9) and Arc Washers (10) from Central post (13) by wrench (A).
• Draw the Pulse cable (6) through the hole of the Central post (13).
• Attach Middle handlebar (4) to Central post (13) with Bolts (8), Spring Washers (9) and Arc Washers
(10).
• Remove screws (2) from Computer console (1).
• Connect Cable 1 (18) and Computer cable (1a). Connect Pulse cable (6) with Computer cable (1b).
Fix computer (1) on Central post (13) with Screws (2).
The actual assembly is complete.
FINALIZING STEPS
• Clean this device thoroughly before first use, as oil residues and dust deposits may be
present on it, due to production and packaging process.
• As a final step, re-check the tightness of all connections.
• Repeat this check before each training session.
18
1
1b
1a
#2 M5x10 (4 PCS)
#8 M8x20xS5 (2 PCS)
#9 d8 (2 PCS)
#10 d8xØ20x2xR30 (2 PCS)
#A S5 (1 PC)
#B S13-14-15 (1 PC)
60
47
1a 1b
6
18
E
59
106
EN