Tivoli Audio Music System Two Mode D'emploi page 10

Menu
Press and hold the volume knob on the Music System Two, or press and hold the Menu button on
the remote control, to enter the main menu. Rotate the knob and press in to change the items within
the menu, or use the remote's pq buttons and Select button.
1. AUTO SCAN (NOT IN AUX OR BLUETOOTH MENUS): Press the Select button and use the
pq arrow and Select buttons to enable or disable Auto Scan. When enabled, Auto Scan will
automatically tune the next station received each time the pq buttons are pressed. When
disabled, the pq buttons can be used to manually navigate the frequencies.
2. RDS TEXT (NOT IN AM, AUX, OR BLUETOOTH MENUS): Press the Select button and use the
up/down arrow and Select buttons to choose between FM RDS scrolling text On, Off, or Static
(text will be displayed but will not scroll).
3. AUTO UPDATE (NOT IN AM, AUX OR BLUETOOTH MENUS): Press the Select button and use
the pq arrow and Select buttons to choose between On or Off. For the auto update to work,
you must have consistent reception of FM RDS with a time/date signal provided. It could take up
to a minute or more for the clock to update. Tivoli Audio is not responsible for inaccurate time/
date information provided by the auto update signal. To set the clock manually, select "Off", and
set the time and date using the "Clock" button.
4. BACKLIGHT: Rotate the volume knob or use the remote's arrow keys to adjust the bars and
control the backlight, then push the knob in to set or press Select on the remote.
5. FM TUNING STEP (NOT IN AM, AUX, OR BLUETOOTH MENUS): Choose 100 or 50 kHz FM
tuning step. 100 kHz is recommended.
6. FACTORY RESET: Press Select and use the pq and Select buttons to confirm (Yes) or reject
(No) the factory reset. A factory reset will restore factory defaults and cancel all your personal
settings such as presets.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not con-
nected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Turn the Music System Two on and press the front panel Bluetooth button. This will power on the
Bluetooth. Turn the volume up about ¼ to start. Also turn up the volume on the source device
(the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select "Tivoli Bluetooth (Not Paired)" when it appears on your device's screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli Bluetooth" will change
from "Not Paired" to "Connected".
4. You will hear a ring tone from the Music System Two confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should not
have to pair your device again. Depending on your device, you may need to make multiple
attempts at Pairing and/or Connecting to the Music System Two, but please give your
device adequate time to Pair or Connect before repeating the process.
10 – ENGLISH
All manuals and user guides at all-guides.com