Tool Specifications; Part List; Intended Use - IVT GCHS-45 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 86
Instruction manual

TOOL SPECIFICATIONS

EN
Rated power [W]
Displacement [cc]
No-load speed [RPM]
Nr. of strokes of engine
Type of engine cooling
Starting system
Type of fuel
Mixture ratio [gasoline:oil]
Fuel tank capacity [ml]
Oil tank capacity [ml]
Chain pitch [˝ / mm]
Chain bar length [˝ / mm]
Max. cutting size [mm]
Vibration level (front handle / rear handle) [m/s
Sound pressure level [dB(A)]
Sound power level [dB(A)]
Weight [kg]

PART LIST

1.
Rear handle
2.
Front handle
3.
Guide bar cover
4.
Casing
5.
Anchor nut
6.
Saw chain
7.
Guide bar
8.
Notched rest
9.
Chain brake initiator
10. Ventilation slots
11. Lock-off button
12. On/Off switch
13. Cover
14. Recoil starter
15. Choke lever
16. Fuel tank plug
17. Oil tank plug
18. Throttle lever
19. Fastening nut
20. Guide bar slot
21. Chain wheel
22. Positioning pin
23. Chain tension bolt
24. Air filter
25. Spark plug
26. Spark plug cap
27. Adjusting screw
Model
]
8.125 / 9.340 (K=1.5)
2
28. Multi-purpose spanner
CONTENT OF THE BOX
Instruction manual (1 pc), multi-purpose spanner (1 pc),
guide bar cover (1 pc), fuel mixing canister (1 pc), file
(1 pc), engine (1 pc), guide bar (1 pc), chain (1 pc), tool
kit (1 pc).

INTENDED USE

This tool is intended for felling trees, cutting logs,
branches, timber, planks and it may be used for
transverse or longitudinal cuts.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user's manual and all other literature
supplied with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
8
GCHS-45
1700
45
10000
2
air cooled
recoil starter
gasoline:oil
25:1
550
260
0.325 / 8.255
18 / 450
450
106 (K=3)
106 (K=3)
6.3

Publicité

Table des Matières
loading

Produits Connexes pour IVT GCHS-45

Table des Matières