Optika Italy B-60 Serie Mode D'emploi page 12

9. Use of the microscope
9.1 Switching the microscope
1. Operate on the light intensity adjustment dial ① to turn ON /
OFF the microscope. (Fig. 8)
9.2 Light intensity adjustment
1. Operate on the light intensity adjustment dial ① to increase /
decrease the illumination voltage. (Fig. 8)
9.3 Stage
B-61V
1. Raise the fixing clips and place the slide on the stage.
2. Lower the clips to hold the slide and prevent accidental fall-
ing. (Fig. 9)
B-62V
Stage accepts standard slides 26 x 76 mm, thickness 1,2 mm
with coverslide 0,17 mm. (Fig. 10)
1. Open the spring arm of the slide holder ② and place the slide
from the front on the stage.
2. Gently release the spring arm of the slide holder.
• A sudden release of the spring arm could cause the fall-
ing of the slide.
①
Page 12
F ig. 8 F
F ig. 9 F
②
F ig. 10 F ig. 10
ig. 8
ig. 9