PURE Evoke Mode D'emploi page 6

Getting started
Quick start
Note: If you have a ChargePAK F1 rechargeable battery (sold separately) fit it now before plugging in
Evoke. See page 21 for more information.
1
Extend the aerial and insert the connector of the supplied power adapter into the 5.5V DC
input on the rear of Evoke. Plug the adapter into the power supply. Pure is displayed briefly
on‑screen.
2
Choose your display language (English, French, German or Italian) by turning the Select dial
to highlight the language you want. Push the Select dial in to confirm your choice. Repeat this
process to select the time zone and region closest to you.
3
The Home screen is displayed:
Turn the Select dial to highlight and press to select one of the following options:
Digital radio
Pure Connect
Network/USB media
FM radio
Auxiliary input
To change any of Evoke's settings, tap the Settings button (see page 17).
4
Aerial
5.5V DC
Aux Speaker Aux Speaker Stereo Out Stereo Out
Digital radio
Pure Connect
Network/USB media
FM radio
Auxiliary input
OK
Settings
See page 13
See page 8
See page 12
See page 13
See page 6