Leg Frame; Modesty Panel - Uline H-10357 Instructions D'assemblage

5. With second person, carefully lift the desktop (1) over
assembled frame and align holes in the frame with
holes in the leg frame connectors (A). Insert four
M6 x 55 mm bolts (D) through leg frames into
leg frame connectors and tighten. Insert two
M6 x 15 mm bolts (F) through modesty panel
connectors (B) into rear of desktop and tighten.
(See Figure 5)
6. Set desk aside. Adjustable height base and L-desk
return frame will be assembled next.
L-DESK RETURN AND ADJUSTABLE HEIGHT BASE ASSEMBLY
1. Align holes in foot (13) with lifting column (11, 12).
Insert four M6 x 40 mm bolts (L) and tighten. Repeat
for opposite foot and lifting column. (See Figure 6)
Figure 6
13
PAGE 4 OF 33
DESK ASSEMBLY CONTINUED
L
11, 12
Figure 5
1
3
2
2. Using three people, set both lifting columns (11,12)
upright and space roughly four feet apart. Place
center frame (9) over both lifting columns. Align
holes in ends of center frame with top of each
lifting column. Insert eight M6 x 10 mm bolts (N) and
tighten. (See Figure 7)
Figure 7
11
B
F
A
D
9
12
9
N
12
0223 IH-10357
2