Uline H-10357 Instructions D'assemblage page 3

NOTE: Count and inspect all pieces before
disposing of any carton or packing materials.
NOTE: Assemble unit on a smooth, non-marring
surface to prevent scratching.
NOTE: Tighten all bolts using 4 mm Allen
wrench.
1. Attach adjustable glides (C) to the bottom corners of
each leg frame (2). (See Figure 1)
Figure 1
2. Align holes on one side of modesty panel (3) with
holes in leg frame (2). Insert three M6 x 45 mm
bolts (E) and tighten. Repeat on opposite side.
(See Figure 2)
Figure 2
3
2
PAGE 3 OF 33
DESK ASSEMBLY
C
2
E
3. Align two modesty panel connectors (B) with holes
in top of modesty panel (3). Attach using two
M6 x 15 mm bolts (F) and tighten. (See Figure 3)
B
F
4. Place desktop (1) upside down. Align leg frame
connector (A) with holes in corner of desktop. Insert
four M6 x 15 mm bolts (F) and tighten. Repeat for
three remaining leg frame connectors. (See Figure 4)
Figure 4
3
Figure 3
1
A F
0223 IH-10357
2