AENO TB2 Mode D'emploi page 13

ENG AENO TB2 electric blender is designed for chopping food, making
smoothies, purees and drinks.
Specifications
Supply voltage: AC 220–240 V; frequency: 50/60 Hz. Power: 800.0 W. Bowl
Capacity: 1.75 L. Measuring cup capacity: 80ml. Dimensions (L×W×H): 230 mm
× 200 mm × 420 mm. Weight: 4.6 kg. Power cord length: 1 m.
Package Contents
AENO TB2 blender, measuring cup, brush, quick start guide, warranty card.
Limitations and Warnings
Children and persons with disabilities may use the device only under the
supervision of adults who are experienced in its use. Keep the device out of the
reach of children. During the operation the bowl housinng heats up. Do not
touch it. Also, do not touch the device housing while it is operating. Do not
disassemble or repair the blender on your own. Do not wash the bowl base
with the electrical contacts and the clutch shaft with water. Place the blender only
on a firm and stable surface. The distance from the operating device to other
objects should be at least 15 centimeters. Do not store the blender cup in the
refrigerator: short circuit of electrical contacts may occur due to condensation. Do
not touch the blender blade. WARNING! The min product level in the blender is
750 ml. Do not exceed the max level for hot liquids (1200 ml) and cold liquids
(1500 ml), it may cause overflow. Do not open the lid of the blender cup while the
blender is in operation. If you hear an intermittent sound of the blade turning
when chopping food, this is normal. If you lift the bowl or open the lid of the
blender while it is running, the protection will be triggered and the motor will stop.
Do not add sugar, plant stems or legumes (beans, peas, chickpeas, lentils) into
the bowl, as the blade can jam and it can cause damage to the device. To clean
the blade use the brush . Before plugging in, make sure that the bowl is
securely seated on the blender base and that the bowl lid is closed.
aeno.com/documents 13