V 1.40
INTRODUCTION
Model SF5040 both drives 18 ga. finishing nails from 15mm to 50mm length, and 18 ga. staples from 16 mm to
40 mm length. The 2-in-1 magazine allows you to shoot staples and finishing nails without adjustment. Large cast
aluminum body provides more power to easily drive nails in to hard wood. Rubber handle grip for improved control
and comfort even during extended use. Features adjustable 360° exhaust port and continuous firing. Narrow nose is
ideal for door and window trims, exterior trims, cabinet work, finish paneling, decorative trims, furniture making, etc.
SPECIFICATIONS
Air Inlet
Max. Pressure
Operating Pressure
Nail Length
Nail Size
Staple Length
Staple Size
Magazine Capacity
Recommended Lubricant
MPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Failure to follow all
instructions may result in electric shock, fire and/or personal injury. Keep this manual for
the safety warnings and precautions, operating, inspection and maintenance instructions.
When using this tool, basic precautions should always be followed to reduce the risk of
personal injury and/or damage to the equipment. Note that when this manual refers to a
part number, it refers to the parts list included.
2-in-1 Air
Stapler Nailer
1/4" NPT
120 PSI
60 to 100 PSI
5/8" to 2" (15 to 50mm)
18 Gauge Brad (1.25 x 1.00mm)
5/8" to 1-5/8" (15mm - 50mm)
18 Gauge 7/32" Staples (1.25 x 1.00mm)
100 pcs.
Air Tool Oil
2
8042509
8042509