Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
2.
Never make adjustments to the components that control tank pressure.
Serious injury or death may occur if modifications are made to the
pressure switch, safety relief valve or other components that control the
tank pressure.
3.
Check operation of the pressure relief valve on a regular basis and never
operate without a factory approved pressure relief valve. Do not make
alterations to the factory operating pressure settings.
POWER TOOL PRECAUTIONS
Tool accessory is a general term that refers to drill bit, saw or cutting blades,
grinding wheel, etc. as appropriate for the tool.
1.
Do not use any power tool with a malfunctioning power switch or control.
A power tool that fails to respond to the controls is dangerous and can
cause an injury. A qualified technician must repair and verify the power
tool is operating correctly, before it can be used.
2.
Do not cover the air vents.
3.
Disconnect the power source before installing or servicing the tool.
4.
Remove adjusting keys and wrenches before using the tool. The tool may eject
an attached wrench or a key and cause an injury to you or a bystander.
5.
Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. Excessive pressure is
the cause if your tool runs smoothly under no load, but roughly under load.
6.
Keep hands and fingers away from the work area. Any part of body
contacting the tool's working parts could cause an injury.
7.
Only use accessories that are specifically designed for use with the tool.
Ensure the accessory is tightly installed.
8.
Only use an accessory that exceeds the No Load Speed rating (see
Specifications).
9.
Before using the tool on a workpiece, test the tool by running it at the
highest no load speed for at least 30 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling. Check the tool
to determine the cause.
10. Never touch the tool accessory or workpiece during or immediately after use.
They may be hot and could inflict a burn injury.
11.
Never use a tool with a cracked or worn tool accessory. Change the tool
accessory before using it.
Visit www.princessauto.com for more information
3/8 in. Pistol Grip Reversible Air Drill
8843542
7
Publicité
Table des Matières
