GE JCAS745 Serie Instructions D'installation page 38

Before you call for service...
Problem
Food does not
broil properly
Control signals after
entering cooking time
or delay start
Display flashes "bAd"
then "linE" with a
loud tone
38
Possible Causes
Oven is not set to BROIL.
Door not open to the broil stop
position as recommended.
Improper shelf position
being used.
Food being cooked in a hot pan.
Cookware not suited for broiling. • Use the broiling pan and grid that came with your
Aluminum foil used on the
broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power
(voltage) may be low.
You forgot to enter a bake
temperature or cleaning time.
The installed connection
from the house to the unit
is miswired.
What To Do
•On models with a temperature knob, make sure you turn
it all the way to the BROIL position. On models with a
BROIL pad, make sure it is turned on.
•See the Using the oven section.
• See the Broiling guide.
• Use the broiling pan and grid that came with your
range. Make sure it is cool.
range.
• See the Using the oven section.
• Preheat the broil element for 10 minutes.
• Broil for the longest period of time recommended in
the Broiling guide.
•Press the BAKE pad and desired temperature or the
CLEAN pad and desired clean time.
•Contact installer or electrician to correct miswire.