To Set The Clock - GE JCAS745 Serie Instructions D'installation

Using the clock, timer and convenience outlet.
Not all features are on all models.
Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The OFF pad does not affect the
timer.

To Set the Clock

The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a timed baking
or self-cleaning cycle.
Touch TIMER pad and hold for
3 seconds.
Touch the + or – pads.
If the + or – pads are not touched within
one minute after you touch the TIMER pad,
the display reverts to the original setting.
If this happens, touch the TIMER pad and
reenter the time of day.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the TIMER pad.
Touch the + or – pads until the
amount of time you want shows in
the display. The maximum time that
can be entered in minutes is 59.
Times more than 59 minutes should
be changed to hours and minutes.
If you make a mistake, touch the TIMER pad and
begin again.
(on some models)
Touch the START/ON pad until the
time of day shows in the display. This
enters the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
TIMER pad. The time of day shows until
another pad is touched.
Touch the START/ON pad. The time
will start counting down, although
the display does not change until one
minute has passed.
When the timer reaches :00, the
control will beep 3 times followed by
one beep every 6 seconds until the
TIMER pad is touched.
13