Publicité
3
Features and Functions
Analog trigger
There are three analog trigger conditions in U2300A series DAQ and the trigger
conditions are as follows:
– Above high
– Below low
– Window
It uses two threshold voltages, which are Low-Threshold and High-Threshold.
Users can easily configure the analog trigger conditions using the Keysight
Measurement Manager software.
Above high
The following figure illustrates the above high analog trigger condition. The
trigger signal is generated when the analog input signal is higher than the
High-Threshold voltage. In this trigger condition, the Low-Threshold voltage is
not used.
Figure 3-12
72
Above high trigger condition
Keysight U2300A Series User's Guide
Publicité
