Benning MM P3 Notice D'emploi page 26

400 V
600 V
7.2 AC voltage ranges (Switch setting: V
The input resistance is 10 MΩ in parallel 100 pF.
Measuring range
400 mV
4 V
40 V
400 V
600 V
The measured value of the BENNING MM P3 is obtained by mean value rectification
and is displayed as r.m.s. value.
The measuring accuracy is specified for a sinusoidal curve. In case of non sinu-
*1
soidal curves, the accuracy of the displayed value decreases.
7.3 Resistance measuring range (Switch setting: Ω,
Overload protection for resistance measurements: 600 V
Measuring range
400 Ω
4 kΩ
40 kΩ
400 kΩ
4 MΩ
40 MΩ
7.4 Diode and continuity test (Switch setting: Ω,
Overload protection: 600 V
The integrated buzzer sounds at a resistance R lower than 50 Ω.
Measuring range
7.5 Capacity ranges (Switch setting:
Conditions: Discharge capacitors and apply them according to the specified polarity.
Overload protection for capacity measurements: 600 V
02/ 2018
100 mV ± (0.6 % of the measured value + 2 digits)
1 V ± (0.7 % of the measured value + 5 digits)
Resolution
0.1 mV ± (1.5 % of the measured value + 5 digits)
1 mV ± (0.9 % of the measured value + 5 digits)
10 mV ± (0.9 % of the measured value + 5 digits)
100 mV ± (0.9 % of the measured value + 5 digits)
1 V ± (1.5 % of the measured value + 5 digits)
Resolution
0.1 Ω ± (0.9 % of the measured value + 5 digits)
1 Ω ± (0.9 % of the measured value + 2 digits)
10 Ω ± (0.9 % of the measured value + 2 digits)
100 Ω ± (0.9 % of the measured value + 2 digits)
1 kΩ ± (1.5 % of the measured value + 5 digits)
10 kΩ ± (1.5 % of the measured value + 5 digits)
eff
Resolution
1 mV
BENNING MM P3
, Hz, %)
AC
Measuring accuracy *
frequency range 50 Hz - 500 Hz
Measuring accuracy
Max. measuring current
1.1 mA
)
within the
1
,
)
eff
Max. open-circuit
,
)
Max. opencircuit voltage
1.5 V
eff

600 V
DC
600 V
DC
Overload
protection
600 V
eff
600 V
eff
600 V
eff
600 V
eff
600 V
eff
voltage
0.4 V
0.4 V
0.4 V
0.4 V
0.4 V
0.4 V
18