Bt Mini Installation; Charging - Midland BT Mini Guide D'utilisation

BT MINI INSTALLATION

Place both speakers in the deep ear pocket of your helmet. You can fix
the speakers using the velcro pad provided in the box.
Place both speakers as much as possible close and centered to your
ears. Place the wired microphone in front of your mouth using the
adhesive Velcro pad.
If you are using the half-boom microphone, fix the boom on the left
side and keep the sponge as closely as possible to your mouth when
wearing the helmet. Be sure the white arrow is facing your mouth.
2
Place the BT Mini unit on the left side of your helmet using the
adhesive mount available inside the box.
The BT Mini can be easily fitted onto the helmet by sliding it downwards
so that it fits into the slot of the adhesive Mount.
The BTMini is maintained in position thanks to the fixing clip located on
the upper section (A).
To detach BT Mini, simply press the fixing clip (A) and push the unit
upwards.
A
Bi-adhesive mount
You can hide the speaker wires under the helmet padding.

CHARGING

Only the USB-C cable is supplied inside the box.
You can charge your BT Mini using any standard USB wall adapter or
PC port. In the box you can find only the USB type C recharging cable.
It takes about 2 hours to fully charge.
midlandeurope.com