Publicité
Les langues disponibles
Les langues disponibles
3
Description
3.1
Product overview
3.2
Intended use
The product described is a hand-held, electric orbital sander. It is suitable for dry-sanding the surfaces of
materials such as wood, paints, varnishes, fillers, metal and plastic.
Operate the power tool only when it is connected to a power source providing a voltage and frequency in
compliance with the information stated on the rating plate, and without use of water.
3.3
Auxiliary grip
This product has an auxiliary grip. This permits comfortable handling and optimum distribution of force,
particularly for high rates of stock removal.
3.4
Dust removal system
This product has a built-in dust extractor with a dust bag. It also comes complete with an adapter for
connecting a suitable external extraction system.
The dust extractor reduces the amount of dust in the air at the workplace and helps prevent dust
accumulations.
3.5
Items supplied
Orbital sander, side handle, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group
4
Technical data
4.1
Technical data
Weight in accordance with EPTA procedure 01
Rated power input
Stroke rate under nominal load
Sanding plate
*314702*
1
314702
Grip surface
@
Air vents
;
Thumbwheel for oscillation-rate preselection
=
On/off switch
%
Locking button
&
Slider
(
Dust bag
)
Clamp
+
Sanding plate
§
Clamp release lever
/
Securing screw for auxiliary grip
:
Auxiliary grip
∙
Sanding sheet (Velcro-type attachment)
$
Flexible grinding disc
£
Suction adapter
|
Extraction hose
¡
Screws for sanding plate
Q
WFO 280
2.8 kg
350 W
3,000 min ... 11,000 min
223 x112 mm
English
15
Publicité
