5 SHORT DESCRIPTION OF THE FRONT PANEL
5.1
DISPLAY
The basic mode on the LCD display (1) shows the value of the voltage and current setting about three channels ;
the output's powerful, the currently regulation mode (CV or CC) and the output's state (ON or OFF). If the OVP
and OCP stopped are less than the maximum setting (32V and 6A) they will be displayed in 3 columns mode.
3 COLONNES MODE
Since the outputs are on that '' ON '' measurement Voltage and Current is displayed instead of
the set if different. Simply touch on V or A selection keys, displays the operator instructions.
5.2
KEYPAD AND SHIFT
The keypad (2) allows directly modifying the set values U and I getting access to secondary functions.
5.3
KEY CONTROL
The keys (3) allows the selection of the set to change and the selection of the dual function keyboard with shift
and keyboard lock.
5.4
CHANNEL SELECTION
The keypad (4) allows choosing the channel to set. ''V'' or ''A'' selected indicates the channel you choose and
you can set.
5.5
ON/OFF: GENERAL 1 STANDBY
The keypad (5) allows to enable disable the 3 outputs simultaneously. Combined with the function ''2nd'' this is
the Standby, which is enabled or disabled.
5.6
ON/OFF: CHANNEL 1 TO CHANNEL 3
The keypad (6), (7) and (8) allow to enable or disable channels 1, 2 and 3.
5.7
KEY SETTING AND NAVIGATE
The keypad + and - (12) allow a direct change to the set value U and I or navigate throught the secondary
functions menu.
5.8
SOUND SIGNAL
Short signal low frequency
Short signal medium frequency
Long signal high frequency
5.9
SAFETY SOCKETS CHANNEL 1 TO CHANNEL 3
The sockets (9, 10 and 11) (safety sockets Ø4mm) allow the connection to the outputs + and – of the channel 1
to the channel 3 to the load.
5.10 EARTH FONCTIONAL SOCKET
The socket (23) (safety and inversed socket Ø4mm) allow a functional connection to the earth.
4000 4 361_09/22
: keypad detect [0] to [9].
: keypad detect function ([V], [A], [OK], ...)
: Input value error or safety detect.
23
2 COLONNES MODE
ENGLISH