Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 SHORT DESCRIPTION OF THE FRONT PANEL
5.1 DISPLAY
The basic mode on the LCD display (1) shows the value of the voltage and current setting, the
output's powerful, the currently regulation mode (CV or CC) and the output's state (ON or OFF).
If the OVP and OCP stopped are less than the maximum setting (32.2V and 6.1A) they will be
displayed.
The measurement (voltage or current) is displayed instead of the set, if different. Simply touch
on V or A selection keys, displays the operator instructions.
5.2
KEYPAD AND SHIFT
The keypad (2) allows directly modifying the set values U and I getting access to secondary functions.
5.3
KEYS CONTROL
The keys (3) allows the selection of the set to change and the selection of the dual function keyboard
with shift.
5.4
ON/OFF : GENERAL & STANDBY
The keypad (4) allows to enable disable the output. The keypad (6) combined with the function ''2nd''
this is the Standby, which is enabled or disabled (consumption
5.5
KEYS SETTING
The keys (5) allows a direct change to the set value U and I or navigate through the secondary
functions menu.
5.6
SOUND SIGNAL
Short signal low frequency : keypad detect [0] to [9].
Short signal medium frequency: keypad detect function ([V], [A], [OK], ...)
Long signal high frequency : Input value error or safety detect.
5.7
SAFETY SOCKETS CHANNEL
The sockets (7) (safety sockets Ø4mm) allow the connection to the output + and – to the load
5.8
EARTH FUNCTIONNAL SOCKETS
The sockets (8) (safety socket Ø4mm ) allow a functional connection to the earth.
4000 4 362-10-20
).
<4W
18
ENGLISH
Publicité
Table des Matières
