Description Of Control Commands; Escape Key; Setting Voltage Value On Channel 1 (15.00V); Setting Current Value On Channel 2 (1.25A) - ELC ALR3206T Manuel De Prise En Main Rapide

6 DESCRIPTION OF CONTROL COMMANDS

6.1

ESCAPE Key :

Press allow go out without taking the value

6.2 SETTING VOLTAGE VALUE ON CHANNEL 1 (15.00V) :

→ →

6.3 SETTING CURRENT VALUE ON CHANNEL 2 (1.25A) :

→

6.4 SETTING OVP VALUE ON CHANNEL 3 (5.25V) :

→

6.5 ISOLATION OUTPUT 1 :

→
Channel 1 OFF

6.6 ISOLATION ALL OUTPUTS :

→
Channel 1 to 3 OFF
6.7 SERIAL MODE (Channel 1 & 2) :
→
After a few seconds the output is ready (OFF).
6.8 PARALLEL MODE (Channel 1 & 2) :
→
After a few seconds the output is ready (OFF).
4000 4 361_09/22
→
→ →
→ →
, →
Channel 1 ON
, →
Channel 1 to 3 ON
.
→ →
→ →
→ →
24
→
→
→ →
ENGLISH