Cable Connections; Running Wheels / Parking Brakes - Vermeiren Régina Mode D'emploi

2.6

Cable connections

1
4
First connect all the cables to the control box  and in the last connect the power cable to
the supply socket.
2.7

Running wheels / Parking brakes

L
WARNING:
Risk of injury – Lock all four wheels in place to put the shell chair in a
parking position.
L
WARNING:
Good operation of the brakes is influenced by wear and
contamination of the wheels (water, oil, mud, ...) – Check the condition of the
wheels before each use.
L
WARNING: The brakes are adjustable and can wear – Check the operation of the
brakes before each use.
L
CAUTION: Risk of unintended movement – Make sure the shell chair is on a flat
horizontal surface before releasing the brakes. Never release all the brakes
simultaneously.
3
1 = Control box
2 = Power supply / transformator
3 = Manual control
4 = Motor
5 = Supply socket
5
2
1
Engaging the parking brakes
With your foot, press the black brake plate of the
wheels downwards till it locks in place. The wheels
cannot roll.
Disengaging the parking brakes
2
With your foot, press the black brake plate of the
wheels in the direction of the frame. The wheels have
now been released and can both roll and swivel.
Page 11
Regina
2013-09