Optika Italy B-383 Serie Manuel D'utilisation page 8

8. Assembling
1. Insert the reflected light illuminator ① on the frame and lock
the locking knob ② with the provided Allen wrench. (Fig. 1)
2. Connect the illuminator cable ③ to the socket ④ placed on
the back side of the frame. (Fig. 2)
3. Insert the optical head above the epi-illuminator and tighten
the locking screw. (Fig. 3)
• Hold the head with one hand during the locking in order
to avoid that the head falls.
4. Insert both eyepieces into the tubes of the optical head. (Fig.
4)
①
Page 8
②
F ig. 1 F ig. 1
③
④
F ig. 2 F ig. 2
F F ig. 3 ig. 3
F ig. 4 F ig. 4