Rockwell Automation Allen-Bradley 1442-PS Serie Instructions D'installation page 4

1442 Eddy Probe Systems Installation Instructions
Prevent Electrostatic Discharge
ATTENTION: This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Clean surfaces with a damp cloth only.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when not in use.
Electrical Safety Considerations
ATTENTION: Power to this equipment must be supplied from a source compliant with the following:
This equipment shall be supplied by a Class 2 supply, as defined in the Canadian Electrical Code, C22.1, rule 16-200, or National Electrical Code, NFPA
70, article 725.121, and a Limited Energy Source in accordance with CAN/CSA C22.2 No. 61010-1-1 and ANSI/UL 61010-1.
4 Rockwell Automation Publication 1442-IN001C-EN-P - February 2023