All operating elements and connections de -
GB
scribed can be found on the fold-out page 3.
1 Safety Notes
The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit is supplied with hazardous
mains voltage. Leave servicing to
skilled personnel only and do not
insert anything into the air vents!
Inexpert handling or modification of
the unit may cause an electric shock
hazard.
During operation, there is a hazard of contact at
the speaker terminals (20) with a dangerous volt-
age up to 100 V. Always fold down the protective
cover (21) when operating the amplifier.
Always switch off the amplifier before making any
connection.
It is essential to observe the following items:
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range 0 – 40 °C).
G
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the unit.
G
Do not set the unit into operation and immedi-
ately disconnect the mains plug from the mains
socket if
1. there is visible damage to the unit or to the
mains cable,
2. a defect might have occurred after a drop or
similar accident,
3. malfunctions occur.
The unit must in any case be repaired by skilled
personnel.
G
Never pull the mains cable to disconnect the
mains plug from the mains socket, always seize
the plug.
G
For cleaning only use a dry, soft cloth, never use
chemicals or water.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
correctly connected or operated, or not repaired
in an expert way.
G
Important for U. K. Customers!
The wires in this mains lead are coloured in
accordance with the following code:
green/yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead of
this appliance may not correspond with the
6
coloured markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green and yellow
must be connected to the terminal in the plug
which is marked with the letter E or by the
earth symbol
.
and yellow.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with
the letter N or coloured black.
3. The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
Warning – This appliance must be earthed.
2 Applications
The amplifier PA-802USB with integrated MP3
player and an RMS output power of 15 W is e. g.
suitable for the use in small PA systems. In addition
to the mains operation, also a 12 V operation is
possible (e. g. with a car battery) so that it is also
suitable for mobile applications. Either use 100 V
speakers or low impedance speakers (minimum
impedance 4 Ω) [see figs. 3a and 3b].
The amplifier is equipped with 3 inputs:
– Microphone input MIC 1 for important announce-
ments taking priority over all other inputs, i. e.
with a signal present at the input, the signals of
the other inputs will be faded out (automatic
talkover)
– Microphone input MIC 2
– Input AUX / PHONO e. g. for CD player, radio,
tape deck or turntable
3 Setting Up the Amplifier
The amplifier can be set up as a tabletop unit or be
fixed at a suitable place, e. g. below a shelf, by
means of the supplied mounting brackets which are
laterally screwed to the housing. In order to ensure
a sufficient cooling of the amplifier, air must always
be able to flow freely through all air vents.
4 Operating Elements and Connections
4.1 Front panel
1 Display of the MP3 player: Shows the title num-
ber and the time already played of a title
2 Button RPT to switch between:
– Continuous repeat of all titles
indication: REP
, or coloured green or green
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.
ALL