VALBERG SBS 592 E X625C Consignes D'utilisation page 15

B
Using the appliance
Changing the Light
This product contains a light source of energy efficiency class G.
Light source in this product can only be replaced by qualified professionals.
Please contact after-sales service if the light source fails.
The light source shall be removed at the end of the product's useful life,
with sorting and recycling done separately.
1. Please take out the plug before removal.
2. Remove the lampshade with a screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
Starting to use
905 mm
1470 mm
• Spare enough space for convenient opening of the doors and drawers.
• The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.
Energy saving tips
• The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the
appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality,
or spoil.
8 EN