8843567
Problem(s)
Tool will not shut off. 1. Throttle valve o-ring
Loss of power or
erratic performance.
12
1/2 in. Pistol Grip Reversible Air Drill
Possible Cause(s)
dislodged from seat
inlet valve.
2. Trigger mechanism
jammed or dirty.
1. Excessive drain on the
air hose. Incorrect size
or type of hose
couplers.
2. Moisture or restriction
in the air hose/tank
3. Air compressor has
insufficient flow.
Suggested Solution(s)
1. Replace throttle valve o-rings.
2. Clean trigger mechanism and
lubricate.
1. Check the air hose and confirm
the hose fitting is correct for the
inlet bushing.
2. Depressurize system and drain
tank and air hose of water.
3. Ensure tool is connected to a
compressor with a rate flow
that matches the tool.
For technical questions call 1-800-665-8685
V1.0