Power Fist 8843567 Mode D'emploi page 11

V1.0
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Tool runs at normal
speed, but loses
power under load.
Tool runs slowly. Air
flows slightly from
exhaust.
Tool runs slowly. Air
flows slightly from
exhaust.
Tool will not run. Air
flows freely from
exhaust.
Visit www.princessauto.com for more information
1/2 in. Pistol Grip Reversible Air Drill
Possible Cause(s)
Motor parts worn.
Motor parts jammed with
dirt particles.
OR
Airflow blocked by dirt.
Air regulator in closed
position.
Damage or excessive
wearing of internal parts.
Suggested Solution(s)
1. Have a qualified technician
service the tool.
2. Replace tool or parts.
1. Check air inlet filter for
blockage.
2. Pour air tool lubricating oil into
air inlet as per lubrication
instructions for clearing
shipping grease.
3. Operate tool in short bursts to
clear debris.
4. If tool still jammed, clean tool
and lubricate per lubrication
instructions.
Open the air regulator to desired
airflow.
1. Have a qualified technician
service the tool.
2. Replace tool or parts.
8843567
11