Lamborghini Caloreclima REMOTO CRM N Manuel De L'utilisateur page 133

Les langues disponibles

3.9 Room temperature reading correction

Follow the instructions below to correct the room temperature reading between –2°C and + 2°C in steps of 0.1°C.

1. Press the button

2. The display shows parameter CU.

3. Press the button

Use the buttons

4. Press any other button to exit the menu.

3.10 Telephone contact input

Normal operation of the Remote Control is ensured as long as the telephone contact remains open. The closing of this contact,

indicated on the display with the symbols

room temperature to a fixed pre-set value.

Follow the instructions below to set the two functions.

1. Press the button

2. The display shows parameter CU.

3. Press the button

Set to 0 using the buttons

Set to 1 using the buttons

parameter P9) when the contact closes.

4. Press the button .

5. The display shows parameter P9.

for 3 seconds.

repeatedly until parameter P7 is displayed.

to adjust the parameter in 0.1°C increments.

>, can be used to force the Remote Control to switch off the heating or to adjust the

for 3 seconds.

repeatedly until parameter P8 is displayed.

to turn heating off when the contact is closed.

to adjust the room temperature to a fixed pre-set value (via the next

code 3541Z230 - Rev. 05 - 12/2021

133