Publicité
Les langues disponibles
Les langues disponibles
Follow the instructions below to change the preset automatic program.
1. Press the button
and confirm with the button
arrow ( ) to indicate that the time band 1 of Monday can be changed.
2. Press the button . The hour and minutes start blinking: press the buttons
start time in 10-minute increments. By keeping the button pressed the hour and minutes will change rapidly.
3. Press the button
/
to change the temperature level in 0.1°C increments. By keeping the button pressed the temperature will
change rapidly.
4. Press the button
5. Then press the button
points 2 to 4.
6. The remaining time bands can be displayed by selecting bands 3, 4, 5 or 6 with the buttons
point 5.
7. It is now possible to choose program setting for the next day:
a. Press the button
b. Press the button
days of the week, press the button
EN
122
. If DHW programming has been enabled, select the radiator symbol with the buttons
. The 6 daily time bands blink and the number 1 of DAY 1 is followed by an
. The indication of room temperature inside the house starts blinking: press the buttons
. The 6 daily time bands blink.
to call up the Monday time slot 2 on the display, which can be modified by repeating
to display DAY 2. The Tuesday program can be modified by repeating points 2 to 6.
to copy the Monday program to Tuesday. To copy the same program also to the following
repeatedly.
code 3541Z230 - Rev. 05 - 12/2021
/
to change the time band
/
, repeating
/
Publicité
