MQ5B_Zub.book Seite 5 Mittwoch, 12. November 2014 1:32 13
For your safety
This accessory is designed for the hand blender MQ5B.. .
Follow the operating instructions for the hand blender.
The accessories are suitable only for the use described in these
instructions.
, Safety instructions for this appliance
Risk of injury from sharp blades!
Never grip the blade in the universal cutter. Take hold of the universal
cutter blade by the plastic handle only.
Do not touch blade of the universal cutter with bare hands.
Clean them with a brush.
Important!
Do not attach or remove accessories until the appliance is at a stand-
still. Never use the hand blender/blender foot in the universal cutter.
The universal cutter is not microwave-safe.
Do not attach or remove the attachment for the universal cutter until the
appliance has come to a standstill. Never immerse the attachment
of the universal cutter in liquids and do not clean under flowing water
or in the dishwasher.
Never insert the whisk into the base unit without the gear attachment.
Never immerse the gear attachment in liquids and do not clean under
flowing water or in the dishwasher.
Before use, read these instructions carefully
in order to become familiar with important
safety and operating instructions for this
appliance.
Please keep the operating instructions
in a safe place.
If passing on the appliance to a third party,
always include the operating instructions.
On account of the different models,
it is possible that not all accessories
are included in your set.
These are also available separately from
customer service.
Universal cutter
Please fold out the illustrated pages.
Fig. 1
1 Universal cutter
2 Blade
3 Attachment
4 Lid
Operation
For cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts, almonds
Always observe the maximum quantities
in the table (Fig. 4).
Warning!
Before cutting meat, remove gristle, bones
and sinews.
The universal cutter is not suitable for cutting
very hard items (coffee beans, radishes,
nutmeg) and frozen food (fruit, etc.).
Fig. 2
Place the universal cutter on a smooth,
clean work surface and press.
Insert the blade.
Add food.
Place the attachment on the universal
cutter and rotate in a clockwise direction
until it "clicks" into position.
Place base unit on the attachment and
rotate in a clockwise direction.
Insert the mains plug.
en
5