Intended Use; Before First Use; Charging The Battery - Westfalia 83 65 68 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Intended Use

 The multi tool may only be used for dry sanding work, for cutting wood and
plastics as well as with the appropriate attachments (cutting tools) for different
work on wood, metal, plaster, plastic and filler surfaces. The sanding paper
pads can also be used for removing rust, old paint and intermediate sanding.
The included straight saw blade (8) is suitable for cutting wood and plastics.
 This multi tool is not intended for commercial continuous operation.
 The intended use also includes an operation following the operating
instructions.
 Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

Remove the multi tool and all accessories out of the packaging and check all
parts for damage in transit. Keep packaging materials out of reach of children.
There is risk of suffocation!
Before undertaking any work on the multi tool, pull out the power
plug!

Charging the Battery

1. The rechargeable battery (3) must be charged before the first use. Only
recharge the battery once it is has been fully discharged, i.e. the power clearly
decreases. Otherwise the battery may not achieve its full capacity. Important!
Only use the provided charging station (12) and power supply unit (11) to
charge the battery.
2. Connect the charging station (12) with the power supply unit (11) and plug into
power mains. The power indicator turns green and indicates that power is on.
3. Insert the battery into the charging station. The power indicator turns red and
indicates that the battery is charged.
4. While charging, the battery and the charging station become lightly warm.
After charging process the power indicator turns green to show that the battery
is fully charged. Charging process takes approx. 1 hour. Remove the battery
from the charging station and unplug from power mains.
All manuals and user guides at all-guides.com
Operation
19

Publicité

Table des Matières
loading

Table des Matières