Table des Matières
Publicité
Before first Use
Remove the unit and the accessory out of the packaging. Keep
packaging materials out of reach of children. There is risk of
suffocation!
Assembling and Using
1. Secure the work piece. Drill the
holes into the work piece. The
diameter of the holes has to
match the diameter of the blind
rivets.
2. Attach
the
attachment as a bit into the drill
chuck of the driving tool.
3. Hold the blind riveting attach-
ment firmly in your hand and
start the driving tool with left-
hand rotation. Allow the tool to
run slowly until you hear a click
sound. Now the collet inside
the blind riveting attachment is
opened and ready for inserting
a blind rivet.
4. Select the correct nosepiece
for the needed blind rivets and
screw the nosepiece on the
blind riveting attachment by
using the included wrench.
Insert a blind rivet into the
nosepiece.
5. Select right-hand rotation and
make sure the speed of the driving tool is not too high.
Assembling and Using
blind
riveting
10
Publicité
Table des Matières
