Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
WARNING:
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
recommended for use with this product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
assembling parts, making adjustments, cleaning, or when the product is not in use.
UNPACKING
◾
This product requires assembly.
◾
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
◾
Inspect the machine carefully to make sure that no breakage or damage occurred
during shipping.
◾
Do not discard the packing material
until you have carefully inspected
and satisfactorily operated the
machine.
◾
If any parts are damaged or missing,
please return the product to the
place of purchase.
ASSEMBLING THE GUIDE BAR
AND CHAIN
1. Remove the battery pack.
2. Lay the pole saw on a firm, flat
surface, so that the side cover is
facing upwards.
3. Wear gloves. Remove the side cover
by turning the quick chain-tension
adjust knob counterclockwise (Fig. 2).
4. Lay the new saw chain in a loop on
a flat surface and straighten any
kinks (Fig. 3).
16
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC
If any parts are damaged or missing, do not operate this product
Do not attempt to modify this product or create accessories not
Always remove the battery pack from the product when you are
2
Quick Chain-tension Adjust Knob
3
Chain Drive Links
Chain Cutters
Publicité
