Ego Power+ PS1000 Manuel De L'opérateur page 26

LED LIGHT (Fig. 16a)
The LED light is at the front of the pole
saw attachment, in line with the saw
chain. This feature provides extra light for
users to see where the saw chain is when
cutting branches high up in the tree.
The light will automatically turn on when
squeezing the trigger switch and it will
turn off about 10 seconds after releasing
the trigger switch.
ASSEMBLING THE SHOULDER
STRAP
NOTE:
Disconnect the shoulder strap
loop included with the shoulder strap and
keep it in a safe place for possible future
use.
For safe and comfortable operation, put
on the shoulder strap across the shoulder
to relieve the weight on the operator's
arms. Depress the carabiner to open it and hook the carabiner onto the shoulder strap
loop (Fig. 16b). Adjust the shoulder strap length to a comfortable operating position.
WARNING:
immediately to avoid injury.
26
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC
When emergency occurs, take the strap off from your shoulder
16a
16b
Shoulder Strap Loop
LED Light