Publicité
Les langues disponibles
Les langues disponibles
◾
To preserve natural resources, please recycle or dispose of oil properly. Consult
your local waste authority for information regarding available recycling and
disposal options.
ADJUSTING THE TELESCOPIC
POLE (Fig. 11)
1. Lift the quick release lever to unlock
the telescopic pole.
2. Extend the telescopic pole to the
required length.
3. Press the quick release lever down
to lock the telescopic pole securely.
INSTALLING/REMOVING THE BATTERY PACK
NOTE:
Fully charge the battery pack before first use.
To install battery pack (Fig. 12)
1. Align the ribs of the battery pack
with the mounting slots in the power
head's battery port.
2. Slide the battery pack onto the
power head until it snaps into
position.
WARNING:
latch on the power head snaps into place
and the battery pack is secured to the power head before beginning operation. Failure
to securely seat the battery pack could cause the battery pack to fall out, resulting in
serious personal injury.
Make sure that the
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC
11
Quick Release Lever
12
Mounting Slot
Telescopic Pole
2
3
1
Rib
23
Publicité
