Ego Power+ PS1000 Manuel De L'opérateur page 29

MAINTENANCE
WARNING:
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING:
therefore, they are always in operating condition. To prevent serious personal injury,
take extra precautions and care when performing maintenance, service or for changing
the cutting attachment or other attachments.
WARNING:
the power head before servicing, cleaning, changing add-on attachments, making any
maintenance or when the product is not in use.
WARNING:
with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes
resulting in possible serious injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic, which may result in serious personal injury.
WARNING:
liquids.
CLEANING
◾
After each use, clean debris from the chain and guide bar with a soft brush. Wipe
the pole saw surface with a clean cloth moistened with a mild soap solution.
◾
Remove the side cover, and then use a soft brush to remove debris from the guide
bar, saw chain, sprocket and side cover.
◾
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
When servicing, only use identical replacement parts. Use of any
Battery machines do not have to be plugged into an electrical outlet;
To prevent serious personal injury, remove the battery pack from
Always wear eye protection with side shields marked to comply
Do not at any time let brake fluids, gasoline, petroleum-based
When cleaning the pole saw, DO NOT immerse it in water or other
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC
29