Nexgrill 720-0783E Mode D'emploi page 18

16. Liquid Propane Tank Installation
(a) Loosen the tank bolt on the back of grill bottom
panel, place the liquid propane tank into the hole
in the bottom panel and tighten the tank bolt at the
back of the grill to secure.
(b) Check the tank valve to ensure it has proper
external mating threads to fit the hose and pressure
regulator assembly provided.
(c) Make sure all burner valves are in OFF position.
(d) Inspect the valve connection port and pressure
regulator assembly. Look for damage or debris.
Remove any debris. Inspect hose for damage. Never
use damaged or plugged equipment.
(e) When connecting pressure regulator and hose
assembly to tank valve, hand tighten quick coupling nut
clockwise to a full stop. Do not use a wrench to tighten
because it could damage the quick coupling nut and
result in a hazardous condition.
(f) Slowly open tank valve fully (counterclockwise). Use
a soapy water solution to check all connections for
leaks before attempting to light your grill .If a leak is
found, turn tank valve off and do not use your grill until
the leak is repaired.
DISCONNECTING THE LIQUID PROPANE
CYLINDER
Turn the grill burner valves "OFF" and make sure the
grill is cool.
Turn the Liquid Propane Cylinder valve "OFF" by
turning clockwise until it stops.
Detach the pressure regulator assembly from the
cylinder valve by turning the quick coupling nut
counterclockwise.
Place dust cap on cylinder valve outlet whenever the
cylinder is not in use. Only install the type of dust cap
on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may
result in leakage of propane.
Fig.16
Pressure Regulator Connection
Your Nexgrill® gas grill is now ready for use.
Before the first use and at the beginning of each
season (and whenever the LP gas tank has been
changed):
1. Read all safety, lighting and operating
instructions.
2. Check gas valve orifices, burner tubes and
burner ports for any obstructions.
3. Perform gas leak check according to
instructions found on page 19 of the manual.
Before cooking on your grill the first time, wash
cooking grids and cooking rack with warm , soapy
water. Rinse and dry thoroughly. Season with
cooking oil regularly. After cooking is completed,
turn grill to HIGH setting for 3 to 5 minutes to burn
off excess grease or food residue.
18
Congratulations
Important